PRE { FONT-FAMILY: verdana,Arial, Helvetica, sans-serif; FONT-SIZE: 9pt; FONT-WEIGHT: normal; PADDING-BOTTOM: 3pt; PADDING-LEFT: 3pt; PADDING-RIGHT: 3pt; PADDING-TOP: 3pt }

Specifications of Gear Hobbing Machine Model V-1500
Maximum Continuous Output (Max. Pitch) 2 D.P. 12 Module
Maximum Diameter of Gear 50" 1270 mm
Maximum Diameter of Gear with extended support 60" 1524 mm
Face capacity for Spur Gear 30" 762 mm
Face Capacity for Helical Gears upto 15 degree 30" 762 mm
upto 30 degree 24" 610 mm
upto 45 degree 22" 559 mm
Distance between Hob Spindle & Surface of Table Maximum 42" 1067 mm
Minimum 9" 229 mm
Axis to Axis distance of Hob Spindle to Table Maximum 36" 915 mm
Minimum 2" 50 mm
Diameter of Work Table 28" 711 mm
Maximum Diameter of Hob 8.5" 216 mm
Maximum Length of Hob 12" 305 mm
Diameter of Hob Arbour 1.25" 32 mm
Diameter of Work Arbour 2" 50 mm
Hob Speeds in R.P.M. 20,30,40,60
Feed of the Hob Slide Maximum 0.1" 2.5 mm
Minimum 0.010" .254 mm
Main Drive Motor 5 H.P. 3.75 Kw
Rapid Motor 2 H.P. 1.5 Kw
Coolant Pump 0.16 H.P. 0.12 Kw
Floor Space Required With Cover Closed 126" x 48" 3200x1219mm
With Cover Opened 150" x 42" 3810x1067mm
Weight of the Machine   7400 Kg
Height of the Machine 105" 2667 mm

STANDARD EQUIPMENT

One Electric Motor 5 HP(960 R.P.M)
One Electric Motor 2 HP(1440 RP.M)
One Electric Coolant Pump
One Work Arbour
One Hob Arbour
One set of 45 Change Gears
Six Segment Supports
One face plate 46" dia.
V-Belt pulley 31" dia
One Handle