PRE { FONT-FAMILY: verdana,Arial, Helvetica, sans-serif; FONT-SIZE: 9pt; FONT-WEIGHT: normal; PADDING-BOTTOM: 3pt; PADDING-LEFT: 3pt; PADDING-RIGHT: 3pt; PADDING-TOP: 3pt }

Specifications of Gear Hobbing Machine Model V-1800
Maximum Continuous Output (Max. Pitch) 1.5 D.P. 16 Module
Maximum Diameter of Gear 72" 1829 mm
Maximum Diameter of Gear with extended support 84" 2134 mm
Face capacity for Spur Gear 32" 762 mm
Face Capacity for Helical Gears upto 15 degree 30" 762 mm
upto 30 degree 20" 508 mm
upto 45 degree 16" 406 mm
Distance between Hob Spindle & Surface of Table Maximum 43" 1092 mm
Minimum 10.5" 267 mm
Axis to Axis distance of Hob Spindle to Table Maximum 46" 1169 mm
Minimum 4" 102 mm
Diameter of Work Table 36" 915 mm
Maximum Diameter of Hob 9.5" 242 mm
Maximum Length of Hob 12" 305 mm
Diameter of Hob Arbour 1.5" 38 mm
Diameter of Work Arbour 2.5" 63.5 mm
Hob Speeds in R.P.M. 16,30,40,65
Feed of the Hob Slide Maximum 0.1" 2.5 mm
Minimum 0.010" .254 mm
Main Drive Motor 7.5 H.P. 5.625 Kw
Rapid Motor 2 H.P. 1.5 Kw
Coolant Pump 0.16 H.P. 0.12 Kw
Floor Space Required With Cover Closed 152" x 64" 3860x1626mm
With Cover Opened 170" x 102" 4318x2590mm
Weight of the Machine   11000 Kg
Height of the Machine 117" 2972 mm

STANDARD EQUIPMENT

One Electric Motor 7.5 HP(960 R.P.M)
One Electric Motor 2 HP(1440 RP.M)
One Electric Coolant Pump
One Work Arbour
One Hob Arbour
One set of 45 Change Gears
Six Segment Supports
One face plate 64" dia.
One Handle